JTC1/SC22/WG14
N751
* Document Number: WG14 N751/J11 97-114
C9X Revision Proposal
=====================
* Title: LIA-1 Binding: Combined LIA-1 + IEC-559 annex
Author: Fred J. Tydeman
Author Affiliation: Tydeman Consulting
Postal Address: 3711 Del Robles Dr., Austin, Texas, USA, 78727
E-mail Address: [email protected]
Telephone Number: +1 (512) 255-8696
Fax Number: +1 (512) 255-8696
Sponsor: WG14
Date: 1997-09-16
Proposal Category:
__ Editorial change/non-normative contribution
__ Correction
Y_ New feature
__ Addition to obsolescent feature list
__ Addition to Future Directions
__ Other (please specify) ______________________________
Area of Standard Affected:
__ Environment
__ Language
__ Preprocessor
Y_ Library
Y_ Macro/typedef/tag name
Y_ Function
__ Header
__ Other (please specify) ______________________________
Prior Art: None known.
Target Audience: Programmers writing programs that perform a
significant amount of numeric processing.___________________
Related Documents (if any):
WG14/N758 C9X and LIA-1 informative annex,
WG14/N756 LIA-1 Binding: Arithmetic exception => SIGFPE,
WG14/N755 LIA-1 Binding: <fenv.h> to <stdmath.h>,
WG14/N753 LIA-1 Binding: Rationale,
WG14/N752 LIA-1 Binding: Optional parts annex,
WG14/N750 LIA-1 Binding: LIA-1 annex,
WG14/N749 LIA-1 Binding: <stdlia.h>,
WG14/N748 LIA-1 Binding: Adding 'pole' from LIA-2,
WG14/N747 IEC 559 Binding: Signaling NaNs,
WG14/N528 C Binding for LIA-1,
WG14/N488 LIA-2 (math library),
WG14/N487 LIA-1 (arithmetic),
WG14/N486 LIA Overview,
WG14/N463 Impact of adding LIA-1,
WG14/N461 C Binding of LIA-1
Proposal Attached: _Y Yes __ No, but what's your interest?
Abstract: This annex documents the binding required for an
implementation to support both IEC 559 and LIA-1.
Proposal:
Note: The '*' characters in the lefthand column are not part
of the proposal (they are useful for emacs M-x outline mode)
In the following, bold text, italic text,
<TT>code sample</TT> are the conventions used to indicate
text different from normal.
* -- Add a new annex (call it I) with the following:
Annex I
(normative)
LIA-1 and IEC 559 compatible arithmetic
* I.1 Introduction
This annex supplements Annex F (IEC 559 binding) and Annex H
(LIA-1 binding) to specify LIA-1 compliant IEC 559 real
floating-point arithmetic. An implementation supports this
specification if and only if it defines the macros
__STDC_IEC_559__ and __STDC_LIA_1__.
* I.2 Extensions to other subclauses
** 7.x.1.2 Floating-point limits is extended with:
-- boolean value (0 or 1) to indicate if IEC 559 tininess is
detected "before rounding" (1) or "after rounding" (0)
for all IEC 559 types,
TINYNESS_BEFORE
-- boolean value (0 or 1) to indicate if IEC 559
loss-of-accuracy is detected as a denormalization loss (1)
or as an inexact result (0) for all IEC 559 types,
HAS_DENORM_LOSS
[Note: These names were chosen to match C++]
** D.x.1.2 Floating-point limits is extended with:
TINYNESS_BEFORE
HAS_DENORM_LOSS
* I.3 Signaling NaNs
Support for signaling NaNs is not required. There is no
binding between Standard C and signaling NaNs, hence there
is no required method to denote any signaling NaNs. This is
a deviation from IEC 559 and from LIA-1.
* I.4 Floating-Point Types
The floating types float and double conform to
both LIA-1 and IEC 559.
The floating type long double shall conform to LIA-1
and should conform to IEC 559.
** I.4.1 Parameters
The FLT_IEC_559 and DBL_IEC_559 parameters shall have the
value 1 (true); LDBL_IEC_559 should have the value 1 (true).
The FLT_SUBNORMAL and DBL_SUBNORMAL parameters shall have
the value 1 (fully supported); LDBL_SUBNORMAL should have
the value 1.
** I.4.2 Operations
The mapping of LIA-1 operations to C operations and the
mapping of IEC 559 unique operations to C operations is
extended with:
The floating point operations are:
= x == y.
?<> x != y.
> x > y.
>= x >= y.
< x < y.
<= x <= y.
? isunordered(x, y).
<> No binding
<=> No binding
?> No binding
?>= No binding
?< No binding
?<= No binding
?= No binding
NOT(>) No binding
NOT(>=) No binding
NOT(<) No binding
NOT(<=) No binding
NOT(?) !isunordered(x, y)
NOT(<>) No binding
NOT(<=>) No binding
NOT(?>) islessequal(x, y).
NOT(?>=) isless(x, y).
NOT(?<) isgreaterequal(x, y).
NOT(?<=) isgreater(x, y).
NOT(?=) islessgreater(x, y).
where x and y are expressions of the same floating point
type.
* I.5 Floating point environment
** - The fedisabletrap, feenabletrap, and fetesttrap functions,
if provided, in <fenv.h> provide the optional IEC 559
facility to test and alter the floating-point trap modes.
** - If the implementation converts arithmetic exceptions that
trap to SIGFPE, then the SIGFPE signal handlers (the user's
and the implementation's default) are the handlers for the
IEC 559 exceptions; otherwise, there are no trap handlers.
** - The fegetprec and fesetprec functions in <fenv.h>, if
provide, are the facility to select among the IEC 559
precision modes.
* I.6 IEC 559 Implementor's choice
** - The macros FE_TRAP_INVALID, FE_TRAP_DIVBYZERO,
FE_TRAP_OVERFLOW, FE_TRAP_UNDERFLOW, and FE_TRAP_INEXACT in
<stdlia.h> if defined, or not, allow an application to
determine if trapping is implemented for the respective
floating-point trap.
** - The macro TINYNESS_BEFORE in <stdlia.h> is the means used
to determine if tininess is detected "before rounding" or
"after rounding."
** - The macro HAS_DENORM_LOSS in <stdlia.h> is the means used
to determine if loss-of-accuracy is detected as a
denormalization loss or as an inexact result.
** - The macros FP2INT_OF_NAN, FP2INT_OF_INF, and
FP2INT_OF_LARGE in <stdlia.h> are the means used to
determine which exception is raised for conversion from any
floating-point type to any signed integral type for
respectively, NaNs, infinity, and large values that cannot
be faithfully represented as an integer.
** - The macros FE_FLTPREC, FE_DBLPREC, and FE_LDBLPREC in
<fenv.h> if defined, or not, allow an application to
determine if dynamic precision control is implemented.